*All Hot Gas temperatures to be stabilised using Calstik Temperature Calibration Device (5mm inside nozzle) or suitable thermocouple probe.
*Numbers given in Degrees °C.
Extrusion welding Temps | |
|---|---|
| Pre heat (Air) | Extrudate (Melt) |
| 260 | 240 |
| 250 | 230 |
High Density polyethylene (HDPE) | |
|---|---|
| Hot Gas Speed | 340 |
Polypropylene (PP) | |
|---|---|
| Hot Gas Speed | 316 |
Polyvinyl chloride (PVC) | |
|---|---|
| Hot Gas Speed | 355 |
| Hot Gas Hand | 295 |
Polyvinylidene fluoride (PVDF) | |
|---|---|
| Hot Gas Speed | 355 |
Polycarbonate (PC) - dry before welding | |
|---|---|
| Hot Gas Speed | 360 |
Polyethylene terephthalate (PETG) | |
|---|---|
| Hot Gas Speed | 350 |
Ethylene chlorotrifluoroethylene (ECTFE) | |
|---|---|
| Hot Gas Speed | 485 |
Fluorinated ethylene propylene (FEP) | |
|---|---|
| Hot Gas Speed | 500 |
Perfluoroalkoxy (PFA) | |
|---|---|
| Hot Gas Speed | 525 |
Perfluoroalkoxy to Polytetrafluoroethylene (PFA to PTFE) | |
|---|---|
| Hot Gas Speed | 550 (575) |
Acrylonitrile butadiene styrene (ABS) | |
|---|---|
| Hot Gas Speed | 365 |
| Hot Gas Hand | 285 |
Polyamide (PA6 or Nylon) | |
|---|---|
| Hot Gas Speed | 360 |
DISCLAIMER
These are only guidelines and Woodside Fusion Ltd accepts no responsibility for any errors.
